HDCAM SR Transfer Los Angeles,CA
ProRes 422 HQ HD | ProRes 422 Avid DNxHD | Uncompressed 10bit |AVI | MOV | H264
HDCAM SR / HDCAM Transfer to Digital Files
Frame Rates:24PsF, 23.98PsF, 50i, 25PsF, 59.94i, 29.97PsF
1920X1080 HD pixel resolution.
A hard drive for your digital files is needed.
ProRes 422HQ HD file = 100GB per hour.
HDCAM SR to ProRes 422HQ
We specialize in HDCAM SR conversion to digital
ProRes 422HQ files. All frame rates and codecs
are supported. Other pro video formats we digitize
are HDCAM, DigiBeta, Beta SP, DVCPRO HD.
We offer volume rate discounts. Please call us
Tel.310-227-2400 or e-mail us for a custom rate quote on your project with the short form below.
HDCAM SR was introduced in 2003 and standardised in SMPTE 409M-2005. It uses a higher particle density tape and is capable of recording in 10 bits 4:2:2 or 4:4:4 RGB with a video bitrate of 440 Mbit/s, and a total data rate of approx. 600 Mbit/s. The increased bitrate (over HDCAM) allows HDCAM SR to capture much more of the full bandwidth of the HDSDI signal (1920X1080). Some HDCAM SR VTRs can also use a 2x mode with an even higher video bitrate of 880 Mbit/s, allowing for a single 4:4:4 stream at a lower compression or two 4:2:2 video streams simultaneously. HDCAM SR uses MPEG-4 Part 2 Simple Studio Profile for compression, and expands the number of audio channels up to 12 at 48 kHz/24-bit. Imagine Video has the Sony SRW-5800 VTR decks, specifically designed for HDCAM SR tape conversion. We can transfer a single tape or an entire library of tapes.